The makers of this utterly fantastic 160-inch behemoth of a wraparound display—a Swedish company called Norman Design—claim the entire rig is actually portable. But since it takes at least an hour to set up, and weighs over 110 pounds, we’d be content with just leaving this permanently assembled in our gaming rooms.
To fill that 160-inches of screen real estate the display uses a series of rear-mounted projectors seamlessly blended together, powered by a sufficiently capable gaming PC running special software.
The results, of course, are stunning. Completely wrapping you in the on-screen action. But there’s a catch, and you can probably easily guess what it is. The screen actually comes as part of an F1 racing simulator kit, complete with a motion-capable seat, that sells for over $114,000. Ouch. The screen can be purchased separately, however, we’re going to assume it will still set you back as much as a reasonably priced car.
160″ (4m x 0,7m) screen solution is portable and only weighs about 50 kg. Takes about 1 hour to assemble. PC with special software is required for reproducing the image from the seamless multi projectorer which is mounted behind. Depth is only 60cm. Resolution approx:9.0 million pixels.
This is only a test run after setting the seamless image reproduction.
Curved big screen solution ideal for digital shooting, you save the set to gunpowder, is also available 3D ready. Then you can adjust 3D depth as you experience the depth 5-20m. Cruel reality faithfully.
Sterecopisca Nvidia 3D glasses required and PCs that have the right hardware.
Screen built by us (AB NDesign Sweden)
It is good for professional simulators, etc. We can also manufacture screen solutions to customer requirements if it is carrying out offense.
Upgrade from week 34, now we can deliver this image solution with 3 projector with Native WUXGA 1920×1200 resolution with 3×8 000 ansilumen projector. The screen resolution of approximately 20 million pixels.
We are also looking for distributors/partners worldwide.